electromagnetic separator dry type
Separador Eletromagnético (Tipo Seco)
Industrial Wet-Type Electromagnetic Separator for Battery Slurry Purification
Separador Eletromagnético (Tipo Húmido)
eddy currrent separator
Combinação de Separador de Correntes Parasitas Excêntricas e Separador de Aço Inoxidável
Electroíman Autolimpante
Filtro Magnético Automático de Pós
Separador Magnético de Correia Transportadora
Armadilha Magnética Automática de Líquidos
Separador Magnético de Grelha Rotativa Automática
Separador Magnético de Grelha Rotativa Automática
Plastics & compounding

Magnetic Separation for Plastics Processing

Protect extruders, moulds and product quality by removing ferrous contamination from pellets, regrind, masterbatch and recycled feedstock.

Pellets Regrind Masterbatch Reciclagem
Review equipment options
Plastic granules with ferrous contamination before magnetic separation
Application image supplied for this industry page.
15,000 Gs Pellet system
2-stage Coarse + fine
ATEX Dust option

Visão geral

A magnetic separator for plastics removes ferrous contamination damages tooling and ends up in the finished part. A single ferrous particle can score an injection mould, mark a film die or create a visible defect in fibre or profile products.

Because plastics are handled as pellets, regrind, flakes or powder, the separation stage is normally a grate, drawer or rotary magnetic element installed before the material reaches the extruder or moulding machine.

Clean plastic granules after ferrous contamination is removed
Application view

Designed around the real material stream

Protect extruders, moulds and finished-product quality by removing ferrous contamination from pellets, regrind, masterbatch and recycled feedstock. Selection depends on flow behaviour, contamination size, conveying velocity and cleaning access.

Where Ferrous Contamination Enters Plastics Processing

Virgin pellets. Contamination can enter from pelletisers, cutters, conveying lines, silo fabrications, hoppers, bags and octabins.

Regrind and recycled flakes. Granulator-blade wear enters the regrind directly. Recycled feedstock can also contain staples, clips, foil and fasteners.

Masterbatch and additives. Mineral fillers, pigments and flame retardants can carry trace iron from mining, grinding and handling.

Machine wear. Screws, barrels, check rings and pneumatic-conveying elbows generate ferrous wear particles, particularly with glass-fibre or mineral-filled compounds.

Most lines run a metal separator for plastic pellets at hopper inlet and a second unit on regrind straight after the granulator,where blade wear is generated - placed where contamination enters, not only where the finished part is inpected.

Magnetic separator for plastics:selection by material Stage

Material stage Recommended element Posição Consideration
Virgin pellets, gravity feed Grate or drawer magnet Hopper inlet or bag-dump station Low bridging risk and easy cleaning access
Virgin pellets, pneumatic transfer Rotary or inline separator Before the day bin Automatic discharge reduces manual cleaning
Regrind and flakes High-gradient drawer or rotary separator After granulation and before blending Higher load requires shorter cleaning intervals
Masterbatch and additives High-gradient powder element At the dosing point Fine contamination requires higher field gradient
Embedded contamination Plastic-pellet iron-removal system Before the extruder Sealed and dust-proof construction
Recycled feedstock Two-stage coarse and fine separation After shredding and granulation Coarse stage protects the final fine stage

Equipment for Plastics Processing Duty

A plastic metal separator at the hopper inlet is specified when tool protection matters more than throughput;drawer and grate designs are the usual choice.

Equipamento Field Position it serves
Plastic-pellet iron-removal system 15,000 Gs Granules and powder with embedded contamination
Hopper magnet separator 14.000 Gs Hopper and machine inlet
Magnetic drawer separator High intensity Pellet and regrind lines
Magnetic grate separator 12.000 Gs Gravity chutes, bag dumps and blender inlets
Automatic rotary magnetic separator 14.000 Gs Bridging-prone materials on continuous lines
Magnetic bar and tube separator 14.000 Gs Silo outlets and material-transfer points
Bullet magnet separator Inline Powder and granule transfer with limited space
Magnetic sweeper Floor tool Recovering spills before returning material

Selection Inputs

  • Material form — pellets, flakes, regrind, powder or melt.
  • Densidade aparente — determines flow across the magnetic element.
  • Contamination load — virgin, mixed regrind or fully recycled material.
  • Débito — kg/h and continuous or batch operation.
  • Conveying method — gravity, pneumatic or mechanical.
  • Temperatura — especially important at dryer discharge.
  • Cleaning access — tool-free access reduces skipped cleaning.
  • Colour changes — quick-release elements reduce carry-over.
  • ATEX classification — required where combustible plastic dust is present.

Cleaning and Colour Changeover

In plastics processing, magnetic-element cleaning is also a quality-control step. Material retained from a previous run can be released into the next batch and create contamination or colour carry-over.

Elements that can be removed, cleaned and refitted without tools are more likely to be cleaned during every changeover. Designs requiring tools and a shutdown are commonly cleaned less frequently.

For a colour change, purge the line, clean the magnetic element, inspect the housing for retained material and record the cleaning on the batch sheet before restarting.

Configurations by Segment

Compounding. Separation normally sits after granulation and at the additive dosing point, especially where filler and regrind loading is high.

Injection moulding. The main driver is tool protection. Separation normally sits at the hopper inlet and should be accessible without lifting the hopper.

Film, sheet and fibre. Fine particles can produce surface defects and die damage, requiring a higher field gradient than standard pellet duty.

Pipe, profile and cable. Long production runs and abrasive fillers increase wear on screws, barrels and conveying equipment.

Recycling. A two-stage arrangement—coarse removal after shredding and fine removal after granulation—prevents the final separator from being overwhelmed.

Verifying Performance

Field measurements recorded against the unit serial number confirm that the supplied magnetic element matches the agreed specification.

A spiked-sample test using the actual pellets or regrind provides a recovery figure at the real conveying velocity.

After commissioning, track the material collected during each cleaning interval. A rising catch can indicate increased upstream wear, while a sudden drop can indicate poor cleaning or changed conveying conditions.

Related Material Guides

Fine contamination in compounds. Read eliminating fine ferrous contamination in polymer pellets .

Extrusion applications. Read magnetic pollution prevention for extrusion machines .

Sizing and material data. Use the magnetic separation sizing-analysis route .

Perguntas mais frequentes

Is a stronger magnet necessary for pellet duty?
Usually not unless the contamination is extremely fine. Correct separator position, conveying velocity and cleaning access can be more important than increasing field strength.
Can one separator cover virgin material and regrind?
It can, but the cleaning interval will be determined by the higher contamination load in the regrind stream. A separate coarse stage can protect the final separator.
How do I know the separator is still working?
Inspect or weigh the material collected during every cleaning and record the result. A consistent catch indicates stable operation.
Does the separator need to be ATEX rated?
The plant’s dust-zone classification determines this. Confirm the classification before quotation because it affects the housing, motor and electrical configuration.
Engineering review

Match the field, housing and cleaning method to the actual stream.

Send the material form, contamination size, throughput, conveying method, temperature and cleaning requirements for a configuration review.

Start your project